6 Quick Tips to Remember When Building Stairs

Building stairs is not an easy feat, especially if you may not even have an idea of how the process happens. Don’t worry. It is not a skill you should be an expert on. Even professionals may find stairs a bit tricky to accomplish. It might be because of all the factors that need to be considered throughout the process.

But, if you seek to learn more about stairs, we can start by discussing their two types. You can choose between a mill-made stair and a carpenter-built stair. A mill-made stair is typically designed in a mill shop. After that, it is shipped to the job site as a kit. Then the stairs will just be assembled and installed on the site where it is needed. On the other hand, carpenter-built stairs are the ones that are constructed by skilled carpenters onsite. This type of stairs is more affordable compared to mill-made stairs.

At Gold Coast Carpenters, we know that building stairs can be an arduous process. That is why we want to help our clients understand the ways to make the building process easier. Check out the six quick tips we will share with you below so you can kickstart your stairs construction as soon as possible.

Tip #1: Check the national and local building code for building stairs.

Before you decide to begin the construction of your stairs, it is vital to check the national and local building codes and requirements in your area. There may be cities or districts with stricter building codes than the others, so make sure that your stair’s design is in line with the requirements to avoid complications during and after the construction.

Tip #2: Be as accurate as you can with the measurements.

If you plan to build a stair by yourself, you have to make sure that the measurements are accurate. This is important to guarantee that the design of the stairs will be safe for use. When you need professional help to determine the overall rise and run of your stairs, you can let our seasoned tradespeople do the work for you.

Tip #3: Ensure that you have sufficient headroom.

Having sufficient space for proper headroom is important to ensure that space can accommodate the stairs you designed. Besides that, it is also needed so you can safely ascend and descend your stairs. If you don’t want to bump your head whenever you use the stairs, make sure that you correctly calculate the space for the headroom.

Tip #4: The riser height from top to bottom should be the same.

The riser or the vertical distance between the steps should have the same measurement from top to bottom to avoid any mishap. Although there are various aspects that may affect the riser’s height, and there can be a maximum of 3/8 inch variation, it is still essential to note that uneven rises can be dangerous, especially for children.

Tip #5: The tread width from top to bottom should be consistent.

The tread or the horizontal surface of each step must also be equal to prevent accidents. Since it is where the foot is placed, the minimum width should be about 250 mm if it is for a residential building and 300 mm if it is a non-residential building.

Tip #6: There must be a proper provision for the handrail.

Handrails are one of the necessities for every stair. It makes the stairs more comfortable and safe to use. If the stairs you will build are open on both sides, make sure to create a handrail for each side. However, if there are walls on both sides of the stairs, you can put them on the walls. It is also essential to note the space allowed between the supports. Remember to check with the building requirements.

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest

Leave a Reply

Your email address will not be published.